Black Antimony Allotrope

Antimony’s three unstable allotropes are black, yellow, and explosive. An allotrope is a variation of the molecular structure of a single element. Differences in chemical structure will give an element different physical properties depending on the allotropic form. For example, carbon has two common allotropes; diamond and graphite. In the diamond form the carbon atoms are arranged in a tetrahedral lattice configuration. In the graphite form, on the other hand, carbon atoms are bonded in layers of a hexagonal lattice.

Black antimony is an amorphous black powder, with a specific gravity of 5.3. It can be obtained when metallic antimony vapor is shock cooled or when liquid antimony hydride is oxidized by air or oxygen at -40° C. Black antimony is more volatile than grey antimony. Chemically active, it oxidizes in the air at atmospheric temperature. When heated to 400° C in the absence of air, black antimony transforms rapidly into ordinary antimony crystals.

Antimony Contracts Upon freezing

There was a debate about whether antimony contracted or expanded during solidification for much of the 1900s. Reports ranged from a 1% expansion to 1.4% contraction. It is thought that these discrepancies were due to two main factors. First, testing was done on antimony samples that lacked sufficient purity. The colligative aspects of the impurities unduly influenced any resulting data. Second, the testing equipment used during these experiments were not reliable. Furthering the false notion that antimony expanded upon solidification was anecdotal evidence gathered from print cast. It was suggested that the fine detail retained from lead-antimony alloy print casts was due to expansion. In 1962, Kirshenbaum and Cahill settled the debate with their careful work. They determined that antimony does, in fact, contract by 0.79 ± 0.14% during solidification.

More Antimony Properties

Antimony is pretty poor heat conductor. For comparison, copper’s thermal conductivity is roughly twenty times larger than antimony’s. Silver thermal conductivity is even bigger at almost twenty-five times that of antimony. In metals and metalloids, thermal conductivity and electrical conductivity track each other. Antimony is typical in this regard as its electrical conductivity is only 1/27 that of copper. Antimony is atypical compared with other metals because it is fragile, readily fractures, is not malleable, and can be easily powdered. Interestingly, antimony loses mechanical strength as its purity increases. It seems that impurities seem to increase its strength. Antimony is an easily meltable nonferrous metal, melting at 630.5° C. Antimony is relatively volatile metal. However, there is considerable disagreement in the literature over vapor pressure data.

Physical properties of antimony

The four allotropic forms of antimony are known as grey, black, yellow, and explosive. The black, yellow, and explosive forms are unstable. Grey, the only stable form of antimony, is what is considered to be ordinary metallic antimony. It is silvery white and exhibits a bluish or purplish luster. Metallic antimony is naturally occurring. However, elemental antimony is rare to the point that it has no practical significance. The atomic weight is 121.75 and its atomic number is 51. The two stable isotopes are Sb¹²¹ and Sb¹²³. The smaller isotopes occurs 57.25% of the time while the larger occurs 42.75% of the time. The electron configuration of the outer valence shell is 5s²5p³. Antimony’s radius is ~0.150 nm. Finally, the atomic volume of antimony is 18.4 cm³/mol at 25° C.

Metallic Antimony

Elemental antimony is a metalloid meaning that not a true metal nor is it a non-metal. It resembles a metal, but it does not demonstrate the necessary chemical properties to be considered a metal. The other metalloids are boron, silicon, germanium, arsenic, tellurium, and polonium. Antimony is a member of the Nitrogen group or group 15 of the periodic table. Older periodic tables will designate the Nitrogen group as Group V or Group VA. Antimony and arsenic are very similar to each other both in terms of physical properties and chemical properties. The two elements easily dissolve into one another. It is very difficult to separate a mixture of antimony and arsenic by extraction metallurgy.